• <source id="eiquc"></source>
    <li id="eiquc"></li>
  • <kbd id="eiquc"><noscript id="eiquc"></noscript></kbd>
  • <blockquote id="eiquc"><noscript id="eiquc"></noscript></blockquote>
  • SPX 24
    24" Swing Slant Bed

    Overview

    The SPX-24 model is Kingston’s most compact entry in its slant bed line. With its 25 HP spindle motor, hydraulic V12 turret, 2.9” bar capacity, 24” swing over bed, and lengths from 28” – 120”, the SPX- 24 is an extremely versatile and powerful production machine. The heavily ribbed one-piece bed and box way casting is made of a fine-grain Meehanite that is heat treated, annealed twice and ground to attain the stability and hardness of HRC53. Each sliding surface is further coated with Turcite-B for optimal performance even under your heaviest loading and cutting conditions. Useful optional accessories to customize your SPX-24 include: C-Axis and live tooling capability, bar feeder interface, 50 HP spindle motor, 20-bar hi-pressure coolant system, and bar capacity upgrades to 4.13”.

    Standard Features

    • Bar Capacity: 2.9"
    • Swing: 24.0"
    • C.C.: 28” – 120"
    • 20 HP / 25 HP (30 min) AC Spindle Motor (Fanuc), 220V, 3 Phase 60 Cycle
    • 10” 3-Jaw Hydraulic Cylinder & Chuck 
    • Fanuc 0iTF Controller w/ Manual Guide & Thread Repair, 10.4" LCD Monitor
    • Registered Part Program Number: 400 Sets
    • V12 Hydraulic Turret
    • Fully Programmable Tailstock Body & Quill
    • Chain Type Chip Conveyor + Chip Cart
    • Pocketed Headstock Wall Accommodates Long Boring Bars

    Optional Accessories

    • C-Axis w/ Controller Upgrade + Live Tooling Turret
    • Rotary Tool Holders
    • 3.54" Bar Capacity Upgrade (12" Hydraulic Chuck)
    • 4.13" Bar Capacity Upgrade (15" Hydraulic Chuck)
    • 40 HP / 50 HP (30 min) Spindle  Motor Upgrade
    • V12 Servo Turret Upgrade
    • Hydraulic Steady Rest
    • Renishaw Tool Setters
    • Oil Mist Collector
    • Oil Coolant Skimmer
    • Bar Feeder Interface

     

    Capacity 28" 48" 66" 86" 120"
    Swing Over Bed 24.0" 24.0” 24.0" 24.0" 24.0"
    Swing Over Saddle 15.2" 15.2" 15.2" 15.2" 15.2"
    Max Cutting Diameter 19.6” 19.6” 19.6” 19.6” 19.6”
    Max Turning Length 27.5" 47.2" 64.5"  86.6" 118.1"

     

    Bed 28" 48" 66" 86" 120"
    Slant Angle 30 deg. 30 deg. 30 deg. 30 deg. 30 deg.
    Guide Way Box Way Box Way Box Way Box Way Box Way

     

    Headstock 28" 48" 66" 86" 120"
    Bar Capacity 2.9" 2.9" 2.9" 2.9" 2.9"
    Spindle Nose A2-8 A2-8 A2-8 A2-8 A2-8
    Power Chuck Diameter 10" 10" 10" 10" 10"
    Max Spindle Speed 3500 RPM 3500 RPM 3500 RPM 3500 RPM 3500 RPM
    Spindle Motor 20 HP / 25 HP (30 min) 20 HP / 25 HP (30 min) 20 HP / 25 HP (30 min) 20 HP / 25 HP (30 min) 20 HP / 25 HP (30 min)

      

    Turret 28" 48" 66" 86" 120"
    Turret Driven Type Hydraulic Hydraulic Hydraulic Hydraulic Hydraulic
    Number of Tools 12 Station 12 Station 12 Station 12 Station 12 Station
    Square Tool Size 1" 1" 1" 1" 1"
    Round Tool Shank Size 1.5" 1.5" 1.5" 1.5" 1.5"

     

    Travels 28" 48" 66" 86" 120"
    X-Axis 9.8" + 1.9" 19.8" + 1.9" 9.8" + 1.9" 9.8" + 1.9" 9.8" + 1.9"
    Z-Axis 29.5" 49.2" 66.9" 88.5" 122.0"
    Rapid Traverse: X-Axis 787 IPM 787 IPM 787 IPM  787 IPM  787 IPM 
    Rapid Traverse: Z-Axis 945 IPM 945 IPM 945 IPM 590 IPM 393 IPM

      

    Tailstock 28" 48" 66" 86" 120"
    Tailstock Body Travel 21.2" 40.9" 62.9" 80.3" 111.8"
    Quill Taper MT#5 MT#5 MT#5 MT#5 MT#5
    Quill Diameter 3.3" 3.3” 3.3” 3.3” 3.3”
    Quill Stroke 4.7” 4.7” 4.7” 4.7” 4.7”

     

    Dimensions 28" 48" 66" 86" 120"
    Floor Space (L x W) 118" x 71" 142" x 71" 177" x 71" 200" x 71" 256" x 71"
    Height 71" 71" 71" 71" 71"
    Weight 12,125 lbs 13,228 lbs 16,530 lbs 19,836 lbs 26,448 lbs

     

    Total Power Required 28" 48" 66" 86" 120"
      30 KVA 30 KVA 30 KVA 30 KVA 30 KVA
    天天斗牛下载