• <source id="eiquc"></source>
    <li id="eiquc"></li>
  • <kbd id="eiquc"><noscript id="eiquc"></noscript></kbd>
  • <blockquote id="eiquc"><noscript id="eiquc"></noscript></blockquote>
  • KMT 3V
    Milling Machine


    The KMT-3V brings Kingston's commitment to quality to a precision milling machine. Turcite-B, which coats the sliding surfaces of the X- and Y-axis for optimal performance, and Meehanite casting make these mills ready to tackle all types of projects. The spindle contains a Class 7 precision bearing and a maximum runout within .0002 inches, with spindle speeds up to 4200 RPM. The knee and table ways are hardened and ground, while a heavy-duty saddle support runs the full width of the table for extra stability. The KMT-3V features a 3 HP motor and an R8 nose; Kingston's rugged design and sturdy head housing ensure this well-built machine will last for years.

    Standard Features

    • 3 HP Motor, R8 Nose
    • Hardened & Ground Dovetail Ways for Knee & Table
    • Meehanite Casting
    • Turcite-B on X & Y Axis
    • Class 7 Precision Bearing (P4) for Spindle
    • Dual Locks on Knee, Table, Saddle, & Ram
    • Max Spindle Runout .0002

    Optional Accessories

    • Best Line Table Power Feed
    • Best Line Cross Power Feed
    • Best Line Knee Power Feed
    • A & T Mechanical Power Lock Drawbar
    • Yaskawa Frequency Inverter Drive (Factory Installation Only)
    • Work Light
    • Coolant System
    • Chip Pan
    • Digital Readout (DRO)
    Table 10" x 50"
    Travel (X x Y) 36.0" x 16.0"
    Travel (Z) Quill 5.0"
    Travel (Z) Knee 16.0"
    Spindle Motor 3 HP
    Spindle Taper R8
    Spindle Speed 60 – 4200 RPM
    Spindle Power Feed Rate 0.0015"/Rev, 0.003"/Rev, 0.006"/Rev


    Overall Height 84.6"
    Overall Length 64.6"
    Overall Width 67.7"
    Weight 2,750 lbs