• <source id="eiquc"></source>
    <li id="eiquc"></li>
  • <kbd id="eiquc"><noscript id="eiquc"></noscript></kbd>
  • <blockquote id="eiquc"><noscript id="eiquc"></noscript></blockquote>
  • HD
    22 / 26 Swing

    Overview

    The big brother to our popular HJ model, Kingston’s HD is a versatile precision lathe that can tackle all of your projects, large and small. The hardened and ground main spindle features a 3-point bearing support with taper roller bearings for heavy-duty precision cutting. Select from either the HD 22” swing model which features a D1-8 Camlock spindle, 4 TPI lead screw, and a 10 HP motor, or the HD 26” swing model which features a D1-11 Camlock spindle, 2 TPI lead screw, and a 15 HP Motor. The timing-belt-driven power train system includes 12 speeds from 13 – 1200 RPM, complete with foot brake. Both bedway and cross slide are hardened and ground. The tailstock quill is heat treated and precisely ground, with a 9.8” travel and 1:1 and 1:4 changeable feeds. Machine lengths available from 35” – 160”. Z-axis rapid traverse standard on 90 C.C. and longer lathes. 

    Standard Features

    • 10 HP (22”) / 15 HP (26”), 230/460V 3 phase, 60 cycle, Switch & Wiring Complete
    • 4.09” Spindle Bore
    • Spindle Nose:  D1-8 (22”) / D1-11 (26”) Camlock
    • 12 Spindle Speeds (13 – 1200 RPM)
    • Lead Screw: 4 TPI (22”) / 2 TPI (26”)
    • 10” Steady Rest with Roller Jaws
    • 4-Way Tool Post, T-Slot Compound
    • Rapid Traverse Standard on 90 C.C. and Longer Lathes
    • Coolant System With Pump And Piping
    • Hardened and Ground Bed and Cross Slide Ways
    • Pull Drawer Chip (Oil) Pan
    • LED Worklight 
    • Full-Length Splash Guard & Chuck Guard

    Optional Accessories

    • 15” Steady Rest
    • Additional 10" Steady Rest
    • 7” Follow Rest
    • Taper Attachment
    • Carriage Stops
    • 20" Face Plate
    • Aloris Quick Change Tool Posts & Sets
    • Digital Readout (DRO)
    • 3-Jaw & 4-Jaw Manual Chucks

     

    Capacity HD-22 HD-26
    Swing Over Bed 22"    26"
    Swing Over Cross Slide 13" 17.5"
    Swing In Gap 31.3" 35.1”
    Gap Width in Front of the Face Plate 10.6” 10.6”
    Distance Between Centers 35" / 60” / 90” / 120” / 160” 35" / 60” / 90” / 120” / 160”
    Width of Bed 15.7” 15.7”
    Height of Center from Leg Bottom 42.0” 44.3”

     

    Headstock  HD-22 HD-26
    Spindle Bore 4.09" 4.09"
    Taper of Spindle Bore & Center  M.T. #7 x #5 M.T. #7 x #5
    Type of Spindle Nose D1-8 D1-11
    Number of Spindle Speed 12 12
    Spindle Speed 13 – 1200 RPM 13 – 1200 RPM

     

    Gearbox HD-22 HD-26
    Number of Feed Changes   16   16 
    Range of Feeds per Revolution - Longitudinal    0.0012” – 0.039”   0.0012” – 0.039” 
    Range of Feeds per Revolution - Cross   0.0004” – 0.0117”   0.0007” – 0.0188” 
    Leadscrew Diameter & Threads / Inch   1.77”, 4 TPI   1.77”, 2 TPI 
    Range of Inch Threads  2 – 72 (44)   1 – 42 (48)  
    Range of Metric Pitches   0.2 – 14 (39)   0.2 – 14 (39) 

      

    Tool Slide  HD-22 HD-26
    Maximum Travel of Compound  9.5”  9.5” 
    Maximum Travel of Cross Slide  15.8” 15.8”

     

    Tailstock HD-22 HD-26
    Tailstock Quill Travel  9.8”  9.8” 
    Tailstock Quill Diameter  2.9”  2.9” 
    Taper in Tailstock Quill  M.T. #5  M.T. #5 

     

    Motor HD-22 HD-26
    Main Drive Motor  10 HP  15 HP 
    Coolant Pump Motor  1/8 HP 1/8 HP

     

    Dimensions HD-22 HD-26
    Floor Space (L x W x H) 87" / 114” / 146” / 177” / 217” x 47" x 59” 87" / 114” / 146” / 177” / 217” x 47" x 59”

     

    Weight HD-22 HD-26
    35" 5,100 lbs 5,300 lbs
    60" 5,300 lbs 5,500 lbs
    90" 6,200 lbs 6,300 lbs
    120" 6,700 lbs 7,000 lbs
    160" 7,000 lbs 8,000 lbs
    天天斗牛下载