• <source id="eiquc"></source>
    <li id="eiquc"></li>
  • <kbd id="eiquc"><noscript id="eiquc"></noscript></kbd>
  • <blockquote id="eiquc"><noscript id="eiquc"></noscript></blockquote>
  • CSX
    Extra Large Swing Capacity

    Overview

    Kingston's CSX is the largest and brawniest entry in its heavy-duty lineup, boasting an impressive 59" swing (35.4" over cross slide) for your largest work pieces — and a colossal 1-meter (39.4") bed width for maximal stability during the heaviest cutting. Spindle bore sizes up to 14.7" and lengths to 240" between centers — plus a powerful 60 HP motor — mean this machine can tackle just about anything. 

    Standard Features

    • Bore: 7.1", 10.0", or 14.7" 
    • Swing: 59"
    • Swing Over Cross Slide: 35.4"
    • C.C.: 80" — 240" 
    • 50 HP / 60 HP (30 min)
    • 39.4” Bed Width
    • Box Way Cross Slide and Carriage
    • V8 Hydraulic Turret (H6 or H4 Optional)
    • Front & Rear Chuck Ready
    • Center Chip Conveyor (Beneath Bed Way)
    • Tailstock with Built-in Center 
    • FANUC 0iTF Controller w/ Manual Guide i & Threading Repair, 10.4" Monitor

    Optional Accessories

    • V12 Live Tooling Turret & Mechanical Spindle Indexing
    • Additional Rear Turret: H4 (350)
    • Steady Rest with Roller Jaw with Two Sleeves (17.7" ~ 25.6", 25.5" ~ 33.5")
    • Roller Bracket (23.62" ~ 33.46", 31.5 ~ 42.13")
    • 7” Boring Bar Support 
    • 4" Sleeve for 7" Boring Bar Support
    • High Pressure Coolant Pump
    • Front or Rear Chip Conveyor (In Addition to Center Conveyor)
    • Additional Swing Diameter
    • Fanuc Arbitrary Speed Threading
    • Manual, Hydraulic, & Air Chucks
    Capacity CSX 7 CSX 10 CSX 14
    Swing Over Bed 59" 59" 59"
    Swing Over Cross Slide 35.4" 35.4" 35.4"
    Distance Between Centers  80” / 120” / 160” / 200” / 240” 80” / 120” / 160” / 200” / 240”  80” / 120” / 160” / 200” / 240” 
    Maximum Cutting Length 79” / 118” / 158” / 197” / 237”  79” / 118” / 158” / 197” / 237”   79” / 118” / 158” / 197” / 237”
    Width of Bed  39.4" 39.4" 39.4"

      

    Headstock CSX 7 CSX 10 CSX 14
    Spindle Bore 7.1" 10.0" 14.7"
    Spindle Motor  50 HP / 60 HP (30min) 50 HP / 60 HP (30min)   50 HP / 60 HP (30min)
    Type of Spindle Nose  A2-15 A2-15 A2-20

     

    Gear Box CSX 7 CSX 10 CSX 14
    Number of Speed Ranges 2 2 2
    Spindle Speed (RPM) 6 — 650 6 — 650 4 — 500

     

    Turret CSX 7 CSX 10 CSX 14
    Turret V8 Hydraulic (Std), H4 or H6 (Opt) V8 Hydraulic (Std), H4 or H6 (Opt) V8 Hydraulic (Std), H4 or H6 (Opt)

     

    Traverse CSX 7 CSX 10 CSX 14
    Max. Stroke X-Axis 28.9"  28.9"  28.9" 
    Max. Stroke Z-Axis 82.5” / 121.8” / 161.2” / 200.6” / 240.0” 82.5” / 121.8” / 161.2” / 200.6” / 240.0” 82.5” / 121.8” / 161.2” / 200.6” / 240.0”
    Rapid Traverse X-Axis 236”/min 236”/min 236”/min
    Rapid Travers Z-Axis 236”/min 236”/min 236”/min

     

    Motor CSX 7 CSX 10 CSX 14
    Servo Motor X-Axis 5.3 HP 5.3 HP 5.3 HP
    Servo Motor Z-Axis 8.0 HP 8.0 HP 8.0 HP

     

    Ball Screw CSX 7 CSX 10 CSX 14
    X-Axis Ø1.41”, P6 Ø1.41”, P6 Ø1.41”, P6
    Z-Axis Ø2.48”, P12 Ø2.48”, P12 Ø2.48”, P12

      

    Tailstock CSX 7 CSX 10 CSX 14
    Tailstock Quill (Nose, Taper, Bearing) A-1-8, M.T. #6, 33024 A-1-8, M.T. #6, 33024 A-1-8, M.T. #6, 33024
    Tailstock Quill Diameter Ø9.4” Ø9.4” Ø9.4”
    Tailstock Quill Travel 7.1" 7.1" 7.1"

     

    Dimensions CSX 7 CSX 10 CSX 14
    Floor Space (LxW) 305” / 344” / 384” / 423” / 470” x 151” 305” / 344” / 384” / 423” / 470” x 151” 305” / 344” / 384” / 423” / 470” x 151”
    Machine Height 91" 91" 91"

      

    Weight CSX 7 CSX 10 CSX 14
    Net Weight (lbs) 31,372 / 35,442 / 39,556 / 43,670 / 47,806 31,372 / 35,442 / 39,556 / 43,670 / 47,806 31,372 / 35,442 / 39,556 / 43,670 / 47,806

     

    Total Power Required CSX 7 CSX 10 CSX 14
      100 KVA 100 KVA 100 KVA

     

    天天斗牛下载