• <source id="eiquc"></source>
    <li id="eiquc"></li>
  • <kbd id="eiquc"><noscript id="eiquc"></noscript></kbd>
  • <blockquote id="eiquc"><noscript id="eiquc"></noscript></blockquote>
  • CX
    Heavy Duty

    Overview

    Kingston's CX series heavy-duty precision lathes are built for cutting heavy and long workpieces for the energy, mining, textile, paper, and transportation industries. Utilizing the same headstocks and spindle bores as Kingston’s tried-and-true engine lathes, the CX is available in a wide variety of configurations so you can customize your machine to your exact needs. Choose from a 4.09”, 7.09”, 10.1”, 12.5”, or 14.7" bore, 34" or 40" swing, and lengths from 80" — 280". It is equipped with a V8 hydraulic turret and a 5.45 HP and 9.5 HP AC servo motors that drive the X- and Z-Axis respectively. The headstock has 4 gearshifts controlled by hydraulics for greater torque and the main spindle has a three-point bearing support system — making it ideal for cutting heavy and extremely hard materials.

    Standard Features

    • Bore: 4.09”, 7.09”, 10.1”, 12.5”, or 14.7”
    • Swing: 34" or 40"
    • C.C.: 80" — 280"
    • CX 4: 25 HP / 30 HP (30 min)
    • CX 7: 30 HP / 40 HP (30 min)
    • CX 10, CX 12, & CX 14: 40 HP / 50 HP (30 min)
    • 22” Bed Width
    • V8 Hydraulic Turret
    • Box Way Cross Slide on Carriage
    • Manual Hand Wheels
    • 11.9" Steady Rest
    • Headstock Cooling System
    • Hydraulic & Manual Quill Movement
    • Rear Chip Conveyor with Cart
    • Fanuc 0iTF Controller with Manual Guide i, 10.4” LCD Monitor

    Optional Accessories

    • C-Axis with V12 Live Tooling Turret and 1-Degree Spindle Indexing
    • 23.5" Steady Rest (40" Swing Only)
    • 19.7" Steady Rest
    • Additional 11.9" Steady Rest
    • 7.9" Follow Rest
    • Roller Bracket (2-Point Roller Rest)
    • H4 Hydraulic Turret (Front or Rear)
    • Tool Block w/ T-Slot
    • 4" Boring Bar Support w/ 3" Sleeve
    • Higher RPM Modifcation: 12 — 1200 RPM (CX4 Only)
    • Siemens 828D with Shop Turn
    • Fanuc Arbitrary Speed Threading
    • Manual, Hydraulic, & Air Chucks
    Capacity 34" 40"
    Swing Over Bed 34" 40"
    Maximum Cutting Diameter 21.6” 27.5”
    Distance Between Centers 80” / 120” / 160” / 200” / 240” / 280” 80” / 120” / 160” / 200” / 240” / 280”
    Width of Bed 22” 22”

     

    Headstock 34" 40"
    Spindle Bore 4.09" (3.5" with Power Chuck) / 7.09” / 10.1” / 12.5” / 14.7” 4.09" (3.5" with Power Chuck) / 7.09” / 10.1” / 12.5” / 14.7”
    Spindle motor 25 HP / 30 HP (30 min) (CX 4), 30 HP / 40 HP (30 min) (CX7), 40 HP / 50 HP (30 min) (CX10, CX 12, CX 14) 25 HP / 30 HP (30 min) (CX 4), 30 HP / 40 HP (30 min) (CX7), 40 HP / 50 HP (30 min) (CX10, CX 12, CX 14)
    Type of Spindle Nose A1-11 with Manual Chuck or A2-11 with Power Chuck (CX 4), A2-15 (CX 7, CX 10), A2-20 (CX 12, CX 14) A1-11 with Manual Chuck or A2-11 with Power Chuck (CX 4), A2-15 (CX 7, CX 10), A2-20 (CX 12, CX 14)
    Hght. Floor to Spindle Center 48.6” 51.5”

     

    Gear Box 34" 40"
    Number of Speed Ranges 4 4
    Spindle Speed (RPM) 8 – 800 or optional 12 – 1200 (CX 4), 7 – 750 (CX 7), 6 – 600 (CX 10), 10 – 400 (CX 12), 10 – 300 (CX 14) 8 – 800 or optional 12 – 1200 (CX 4), 7 – 750 (CX 7), 6 – 600 (CX 10), 10 – 400 (CX 12), 10 – 300 (CX 14)

      

    Turret 34" 40"
    Standard Turret V8 Hydraulic V8 Hydraulic
    Turret Options H4, Toolblock with T-slot H4, Toolblock with T-slot

     

    Traverse 34" 40"
    Max. Stroke X-Axis 20.1” 20.1”
    Max. Stroke Z-Axis 86.6” / 126.0” / 165.3” / 204.7” / 244.1” / 283.4” 86.6” / 126.0” / 165.3” / 204.7” / 244.1” / 283.4”
    Rapid Traverse X-Axis 157"/min 157"/min
    Rapid Traverse Z-Axis 236"/min 236"/min

     

    Motor 34" 40"
    X-Axis Servo Motor 5.3 HP 5.3 HP
    Z-Axis Servo Motor 9.4 HP 9.4 HP

     

    Ball Screw 34" 40"
    X-Axis ø1.26”, P = 5 ø1.26”, P = 5
    Z-Axis ø2.5”, P=10 (< 200”) / 3.15”, P=10 (≥ 200”) ø2.5”, P=10 (< 200”) / 3.15”, P=10 (≥ 200”)

     

    Tailstock 34" 40"
    Tailstock Quill Center M.T. #6 M.T. #6
    Tailstock Quill Diameter Ø5.9” Ø5.9”
    Tailstock Quill Travel 8.6” 8.6”

     

    Dimensions (L x W) 34" 40"
    Floor Space (CX 4) 261" / 302" / 342" / 380" / 431" / 470" x 99" 261" / 302" / 342" / 380" / 431" / 470" x 99"
    Floor Space (CX 7, CX 10, CX 12 / 14) 268" / 309" / 349" / 387" / 431" / 470" x 99" 268" / 309" / 349" / 387" / 431" / 470" x 99"

     

    Weight (lbs) 34” 40"
    CX 4 15,000 / 17,200 / 19,400 / 21,600 / 23,800 / 26,000 15,400 / 17,600 / 19,800 / 22,000 / 24,200 / 26,400
    CX 7 18,040 / 20,240 / 22,440 / 24,640 / 26,840 / 29,040 18,480 / 20,680 / 22,880 / 25,080 / 27,280 / 29,480
    CX 10 18,480 / 20,680 / 22,880 / 25,080 / 27,280 / 29,480 18,920 / 21,120 / 23,320 / 25,520 / 27,720 / 29,920
    CX 12 20,460 / 22,660 / 24,860 / 27,060 / 29,260 / 31,460 20,900 / 23,110 / 25,300 / 27,500 / 29,700 / 31,900
    CX 14 20,460 / 22,660 / 24,860 / 27,060 / 29,260 / 31,460 20,900 / 23,110 / 25,300 / 27,500 / 29,700 / 31,900

     

    Total Power Required 34" 40"
    CX 4 50 KVA 50 KVA
    CX 7 50 KVA 50 KVA
    CX 10 60 KVA 60 KVA
    CX 12 60 KVA 60 KVA
    CX 12 60 KVA 60 KVA
    天天斗牛下载